new improved casing
The casing is manufactured from a new washable "Biomaster" material that reduces bacteria growth and the egonomic rubber seal reduces the risk of the ingress of water or dust. As well as being water resistant, it is still 'probably' the fastest reading contact thermometer on the market today. The true temperature of a product can be tested in under four seconds.
|
what is Biomaster?
Biomaster additives are powerful broad-spectrum inorganic, silver-based biocides for use in plastics, helping to reduce hygiene risks. The concentration of silver, in the patented anti-microbial active agent in Biomaster, provides a release of silver ions on demand, which in turn safely inhibits microbial growth.
|
|
 |
reduced tip - foldaway probe
The Thermapen thermometer incorporates a reduced tip, stainless steel, food penetration probe that conveniently folds back through 180 degrees into the side of the instrument when not in use. The response time of any thermometer is dependant on many factors, the mass of the sensing tip, heat transfer and, most importantly, the state of the substance being measured. With both air and liquid, agitation is crucial to rapid response. The ETI calibration laboratory has tested the Thermapen in a stirred water bath with amazing results. Each Thermapen reached 100% of the test temperature in under four seconds.
larger display
The SuperFast Thermapen incorporates a larger digital display with a precise read-out of temperature over the range of -49.9 to 299.9°C with a 0.1°C resolution and an improved accuracy of ±0.4°C over the range of -49.9 to 199.9°C, thereafter ±1°C. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each SuperFast Thermapen is powered by two 3 volt CR2032 lithium coin cell batteries with a minimum life expectancy of 1,500 hours. The SuperFast Thermapen is supplied complete with batteries and an instruction card.
